HPR 5 is a premium, full synthetic SAE 5W-40 Original Equipment Manufacturer (OEM) warranty, Fully Licensed/Approved engine oil. Contains a DOUBLE LAYER of engine wear protection with FULL ZINC and Penrite’s advanced EXTRA TEN technology. It uses a combination of the latest additive technology and a low shear rate viscosity modifier, to ensure additional protection against wear, corrosion, oxidation, piston deposits and sludge under tough conditions
HPR 5 is Mercedes-Benz approved to MB-Approval 229.5 and is Licensed by the API (American Petroleum Institute) to meet SN specifications ensuring quality and satisfaction. It also exceeds the latest European ACEA A3/B4 requirements, as well as many other manufacturers’ specifications.
HPR 5 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines.
HPR 5 is suitable for use in vehicles that specify SAE 5W-30, SAE 10W-30 or SAE 5W-40 viscosity engine oils in the owner’s handbook. It can be used where ILSAC GF-3 / GF-4 / GF-5 and or where ACEA A1/B1 and A5/B5 fuel economy and long service life specifications are requested by the manufacturer. It can also be used where previous API specifications SM (2004-10), SL (2001-04), SJ are recommended. It is suitable for use in LPG and light duty diesel engines where API CF, ACEA A3/B3 and A3/B4 is recommended. It is NOT suitable for use in diesels fitted with a DPF (Diesel Particulate Filter) that require an ACEA “C” grade Low-SAPS (Sulphated Ash, Phosphorus & Sulphur) engine oil.
HPR 5 is an OEM Approved product for Mercedes Benz vehicles requiring MB-Approval 229.5. As a manufacturer approved product, it provides full warranty approved service requirements for these vehicles. It is also suitable for use where BMW LongLife-01 is required and where Ford WSS-M2C913-C/D specification engine oils are required for out of warranty service. It can also be used in many other vehicles that require a full synthetic, petrol and light duty diesel engine oil.
HPR 5 is suitable for use in passenger cars, 4WD's, light commercial vehicles and meets JASO MA specifications for use in four stroke motorcycles that use a wet clutch system. It is compatible with Petrol/LPG (Dual Fuel)/E10 & Diesel and other conventional fuels. Can be used with E85 fuels for competition purpose. Penrite recommend changing the oil more regularly if using E85 fuel.
HPR 5 features the Penrite EXTRA TEN in the oil's SAE rating. This technology helps protect your engine by using a normal start up viscosity with an oil that has a higher operating temperature viscosity. This improves engine oil film strength, lowering frictional heat whilst providing an extra layer of anti wear protection over standard SAE grade oils, reducing engine wear in all driving conditions.
Please Note: When changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below
|Density at 15°C, kg/L||0.857|
|Viscosity, Kinematic, cSt at 40°C||91|
|Viscosity, Kinematic, cSt at 100°C||14.4|
|Cold Cranking Viscosity, cP at -30°C||6400|
|Zinc, Mass %||0.124|
|Phosphorus, Mass %||0.113|
|Sulphated Ash, mass %||1.28|