ENVIRO+ 5W-30 is a premium full synthetic, SAE 5W-30 Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved engine oil. It is fully approved for warranty service for VAG (Volkswagen Automotive Group) vehicles such as Volkswagen / Audi / Skoda / Seat engines using the latest advances in mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* additive technology.
Enviro+ 5W-30 is VW 504 00/507 00 APPROVED and exceeds ACEA C3 specifications.
ENVIRO+ 5W-30 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines. It is suitable for use in direct injection (FSI/TSI) petrol and light duty diesel (TDI) engines including those fitted with/without DPF’s (Diesel Particulate Filters).
ENVIRO+ 5W-30 may be used where SAE 0W-30, SAE 5W-30 and SAE 10W-30 grade oils are specified by the manufacturer. It can be used where ACEA C3 oils are specified by the manufacturer. It can also be used for vehicle models prior to 2008 model year where fuel economy specifications ACEA A1/B1 (Obsolete) and ACEA A5/B5 are required or where ACEA A3/B4 was specified. It may also be used where ACEA C2 is required.
ENVIRO+ 5W-30 is suitable for warranty service in Audi, Volkswagen and Skoda vehicles where VW 504 00 / 507 00 specifications are required. It is also suitable for use where MB 229.31/229.51, BMW Longlife-04, Porsche C30, Chrysler MS-11106 oils are required in vehicles such as Mercedes Benz, BMW, Porsche, Chrysler/Jeep & SsangYong as well as other vehicles requiring these specifications.
ENVIRO+ 5W-30 is suitable for use in passenger cars, 4WD’s & light commercial vehicles and can be used with Petrol, LPG, E10, diesel (With & Without DPF’s) & other conventional fuels. It is not recommended for use in motorcycles.
For vehicles fitted with a Diesel Particulate filter we recommend the use of Penrite ENVIRO+DPF CLEANER to clean & prevent DPF blockages, maximise catalyst life and improve engine efficiency, power & fuel economy.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
* Low SAPS oils may sometimes be referred to as "Low Ash" oils
|Density at 15°C, kg/L||0.852|
|Viscosity, Kinematic, cSt at 40°C||68.3|
|Viscosity, Kinematic, cSt at 100°C||11.7|
|Cold Cranking Viscosity, cP at -30°C||5906|
|Ca content, Mass %||0.162|
|Zinc, Mass %||0.085|
|Phosphorus, Mass %||0.075|
|Sulphated Ash, mass %||0.70|